Hackintosh Installation Asrock X99 Extreme4 Yosemite Core i7-5820k

Welcome, Visitor. Subscribe to our RSS Feed and consider adding this article/site to your favorite social bookmark site if you find it useful. Thank you!

After hours of trial and error I found a way to run hackintosh on my Asrock X99 Extreme4 Yosemite Intel Core i7-5820k build. I was trying to install Install MAC OS X Yosemite on my Asrock X99 Extreme4 Yosemite Intel Core i7-5820k build. I have followed a video instruction from YouTube user Bob Roche. His method helped me to install and copy installation to a MBR drive. But I was not able to boot from the MBR drive . Then I accidentally found my own steps to install Hackintosh for my Asrock x99 build. I am sharing additional steps for people who are having same issues for hackintosh installation.

Hackintosh Asrock x99 i7 5820k

Hackintosh Asrock x99 i7 5820k


My Hakintosh Build:

  1. Processor: Intel Core i7 6-Core 5820k
  2. Motherboard: Asrock X99 Extreme4
  3. Graphics Card: sapphire Radeon™ R9 200 Series. 3GB ram
  4. Ram: 16GB Crucial DDR4 RAM

Hackintosh Installation steps:

I have followed following steps for installing hackintosh on Asrock X99 Extreme4 Yosemite Core i7-5820k / R9 200 build:

Step 1: Followed installation steps from this YouTube video from YouTube user Bob Roche : https://www.youtube.com/watch?v=cx_RD7CduDM

For my installation I needed following boot flags:

npci=0x3000 -x -v

Step 2: After cloning drive using I tried installing boot loader but it didn’t work.  Then I booted from flash drive and re-installed Yosemite on the MBR drive.

Step3: Restarted my machine and used USB drive to boot into Cloned drive with following boot flag:

npci=0x3000 -x -v

I was able to boot into cloned drive.

Step 4: Launched Multibeast and completed post installation by selecting following options:

  • Drivers:
    • Audio:
      1. VoodooHDA v2.8.7
    • Disk:
      1. 3rd Party eSATA.
      2. Intel Generic AHCI SATA
      3. Enabler Trim Patch : 10.10.3 TRIM Patch
    • Misc:
      1. EvOreboot.
      2. FakeSMC v6.11.1394
      3. NullCPUPowerManagement
      4. USB 3.0
      5. VoodooTSCSync 6Core ( For 5820k processor)
    • Network:
      1. Atheros : Killer ALXEthernet v1.0.2
      2. Intel : AppleIntelE1000e v3.1.0
  • BootLoaders:
    • Chimera v4.0.1
  • From Customize:
    • Boot Options:
      1. 1080p Display Mode
      2. Basic Boot Options
      3. IGPEnabler=No
      4. Instant Menu
      5. Kext Dev Mode
      6. User KernelCache.
    • System Definitions:
      1. From Mac pro : Mac Pro 6,1
    • Themes:
      1. Any theme

Step 5: Then finished post installation from Build. At this point I restarted my system using cloned drive using following kernel extension:

npci=0x3000 -v -x

Now I received Boot0 = Error while booting from cloned drive.

boot0 Error Hackintosh

boot0 Error Hackintosh

If you receive same error then follow solution 1 from this guide: Boot0 Error

I fixed boot0 error using following command stated on the guide:

dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2

Step 6 : Restarted my system and used following boot flag to boot from cloned drive:

npci=0x3000 -v

At this point Your hakintosh is ready. If you get any kernel panic error from Bluetooth extensions, then boot using following boot flag :

npci=0x3000 -v -x

Backup and Delete following kext from /System/Library/Extensions/ path :




Then restart your system using  npci=0x3000 boot flag. Enjoy your hakintosh build. If you have any question please let me know.

, , ,

6 Responses to Hackintosh Installation Asrock X99 Extreme4 Yosemite Core i7-5820k

  1. Mohid January 2, 2016 at 12:03 pm #

    Thanks for providing this information. I was having same issue. It solved my problem.

    • Yannis May 14, 2016 at 9:52 am #

      I have exactly the same specs with you. Followed Rob Roche’s Unibeast method but I get always stuck at IOBluetoothHCIController when booting from Unibeast USB. Tried nv_disable=1, graphicsEnabler=Yes but no luck. Any ideas? Thanks.

      • Garnel August 13, 2016 at 9:00 pm #

        Every PC is different. My PC was able to install hakintosh with above steps. I recommend checking http://www.tonymacx86.com/forums/ for trouble shooting the issue by posting error log.

  2. Mixolyd April 3, 2016 at 1:02 pm #

    I’m considering this build for Logic Pro use. Would you guys recommend it for a first time hackintosh user? Are you still happy with your system and how it is running?

    • Garnel August 13, 2016 at 8:56 pm #

      My system is running fine without any issue.

  3. Aaron Green October 15, 2016 at 2:26 pm #

    I cannot get the Kernels/kernel folder to even appear? Everytime I load it those files are missing? What am I doing wrong, I think I’m following the steps exact and not sure how anything I am doing would bypass that!

Leave a Reply

17 − 7 =