Tag Archives | Windows Vista

Fix Blue Screen problem in Vista

If you have Blue screen Problem in windows Vista you can try this steps to Fix Blue Screen error problem in Vista. At first you have to Boot with Vista installation CD.

To Repair using Vista Cd Follow this steps :

Try this my friend to solve your problem.

Boot with Vista installation CD and run repair following below steps
1. Insert the installation disc. Restart your computer. Click the Start button Picture of Start button, click the arrow next to the Lock button Picture of Lock button, and then click Restart.

2. If prompted, press any key to start Windows from the installation disc.
Note If your computer is not configured to start from a CD or DVD, check the information that came with your computer. You may need to change your computer’s BIOS settings. For more information, see BIOS: frequently asked questions.

3. Choose your language settings, and then click Next. Click Repair your computer.

4. Select the operating system you want to repair, and then click Next.

5. On the System Recovery Options menu, click Start up Repair. Start up Repair might prompt you to make choices as it tries to fix the problem, and if necessary, it might restart your computer as it makes repairs.

If vista is preinstalled on your pc or laptop Go to recovery option on your computer:

1. Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.

Continue Reading →

Tags for the article:

    blue screen error in vista,blue screen problem,blue screen error vista,blue screen error in windows vista,blue screen vista fix,blue screen vista,blue screen problem in vista,how to solve blue screen error in vista,vista blue screen fix,fix blue screen vista
Continue Reading >>

Windows Vista not starting

If Windows Vista is not starting on your pc, there are  many tools you can use to fix the problem. There is a nice tool  called WinRE (Windows Repair Environment… including Startup repair. [Startup Repair is a tool that automates diagnostic and repair tasks of unbootable Windows Vista installations] ). Windows Error Recovery starts and runs automatically upon boot, startup Repair can be launched as a manual recovery tool from a DVD, (Start WinRE by booting to Vista OS Backup Media DVD)
Startup Repair will try to repair computers that are unbootable because of the following reasons:
• Registry corruption
• Missing or damaged system and driver files
• Disk metadata corruption (MBR, partition table, and boot sector)
• File system metadata corruption
• Installation of problematic or incompatible drivers
• Installation of incompatible Windows service packs and patches
• Corrupt boot configuration data
• Bad memory and hard disk hardware (detection only)
When starting from a CD/DVD or the F8 (Advanced Boot Options – Repair your computer) you can manually launch Startup Repair and other recovery tools.
Lets say you have NTOSKRNL.exe is missing or corrupt flagged.
1. Start Windows Recovery Environment (WinRE).
2. During Startup Repair, at the Do you want to restore your computer using System Restore? message, click Cancel.
3. Computer restarts, Startup Repair runs again for a total of three times.
4. At the Startup Repair cannot repair this computer automatically screen, click Don’t send.
5. In Windows cannot repair the computer automatically screen, click View advanced options for system recovery and support.
6. At System Recovery Options, click Command Prompt.
7. At the Command Prompt, type C:, and press ENTER.

Continue Reading →

Tags for the article:

    windows vista not starting,vista not starting,windows vista will not start,vista will not start,Vista not start,windows vista not working,windows vista is not starting,vista is not starting,vista not starting properly,windows not starting vista
Continue Reading >>

Pen drive as a temporary ram in vista

If u have low Ram On vista u don’t have to upgrade your ram.U can Use Your pen drive as a ram.

In order to activate the ReadyBoost technology on your FlashDrive or Memory Cards, you have to follow these steps…

1. Open My Computer.
2. Right Click on the Removable Disk Drive and select Properties.
3. Click on ReadyBoost Tab.
4. Enable the feature by selecting the option and allocate the amount of space you want to use as memory.
Things to be noted….
1. Regardless of the fact that you use Readyboost or not, you need at least 512 Mb of memory to run Windows Vista decently.
2. If your device is not giving the option of ReadyBoost then it means that it doesn’t clear up the minimum data trasfer rate required by ReadBoost technology.

Here is a video tutorial for Windows Vista Readyboost:


Tags for the article:

    temporary RAM
Continue Reading >>